Hot Tub LAING Pump Circulation 240V E10-NSHNDNN2W-02 SD6000-125


Product Description

Hot Tub Replacement Part Laing


Fits Most Sundance ,Jacuzzi And Other Brands Universal This for A 240v System Check Your Voltage Before You Install 

6000-125 6050U0016

, Laing Pump, 230/ 240 Volt 3/4 inch barbed connection.


The Laing CircPump is used on many spa/hot tubs and can be used ot replace most brands of circulation pumps with 3/4 inch barbed fittings.

This pump uses 40% less energy and runs 40% cooler than previous models. It also includes a smart "chip" in the motor that gradually increases rpm at power up that minimizes impeller cavitation and ensures "air lock" free startups. This cycle will repeat up to 10 times until "prime" is established. If prime is not established, the pump will shut down and require manual restart (turn power to spa off and back on).
Please note: The pump will not operate without water on the head of the pump, do not try and bench test this pump without it being in the spa so the pump is water primed.

Comes with metal braket

The pumps are water tested at the Factory so when you recieve it it may have a little water left in the wet end of the pump.


This Pump is used on the following Sundance® Spas: 

  • Mid 2009+ 680 Burlington, Hartford, and Hawthorne equipped with a Circ Pump
  • Mid 2009+ 780 Hamilton, Chelsee, Certa and Camden
  • 2008+ 680 Burlington, Hartford, and Hawthorne equipped with a circ pump
  • 2007 680 Hartford and Hawthorne equipped with a circ pump
  • 2007+ 780 Hamilton, Chelsee, Certa and Camden
  • 2006 Palermo, Bahia and Cayman
  • All 2005 780 Series spas
  • All 2003-2004 Sweetwater models (Except Lagunas)
  • All 1997+ North American/Export 800, 850 Series PermaClear Systems (Except 2005+ 880 Series Models)
  • Replaces part number 6500-035 , SM-909-NHW-18 3/4

The Pump is used on the following Jacuzzi® Spas:

  • 2002+ Jacuzzi J-300 Circulation Pump 240V 50/60 Hz with Cord 6000-125 is for all Jacuzzi J-300 240 Volt Models.
    Replaces the following: 
  • SM909-NH-14 3/4" Barb 230Volt 
  • SM909-NHW-14 3/4" Barb 230Volt 
  • SM909-NH-18 3/4" Barb 230Volt 
  • SM909-NHW-18 3/4" Barb 230Volt 
  • SM909-NH-26 3/4" Barb 230Volt 
  • SM909-NHW-26 3/4" Barb 230Volt 
  • SM959-NHW-26 3/4" Barb 230/50Volt 
  • SM1212-NH-26 3/4" Barb 230Volt 
  • E10-NSHNSW-20
  • E10-NSHNDNN2W-02
  • E10-NSHNDNN2W-01
  • 6000-125 or 6000-125E Sundance and Jacuzzi part number

PLEASE NOTE: This pump is a 230/240 Volt Pump, the wires that come with the pump is white, black and green, the white and black are the 2 hot leads with the green as a Ground. Do not confuse this pump for a 120 Volt version!